Hantek DSO2000 Series Dual Channel Digital Oscilloscopes

Sale!
Hantek DSO2000 Series Dual Channel Digital Oscilloscopes
Hantek DSO2000 Series Dual Channel Digital Oscilloscopes - Image 2
Hantek DSO2000 Series Dual Channel Digital Oscilloscopes - Image 3

Buy it now

Price range: $569.25 through $766.12 incl. GST

SKU: DSO2000 Categories: , Brand:
FREE Shipping On All Orders

Choose your options to check availability

Staff Review

The Hantek DSO2000 Series Oscilloscopes are great all-rounders for the bench. We’ve used the DSO2C10 for audio repairs, power supply troubleshooting, and general electronics work, and it handles everything smoothly. The decent bandwidth and 1GSa/s sampling rate are more than enough for most hobby and light professional tasks.

It’s compact, easy to use, and the screen is crisp and responsive. Built-in serial decoding and USB connectivity are nice extras at this price point. For everyday tinkering, repairs, and testing, it’s a reliable and affordable scope that gets the job done.

Video

Description

Features

  • 2 channels with independent control knobs
  • 100 MHz and 150 MHz analog channel bandwidth options
  • Sampling rate up to 1 GSa/s
  • 8M memory depth for waveform accuracy
  • Vertical range 2mV/div to 10V/div
  • Built-in 1CH 25MHz waveform generator (DSO2D10, DSO2D15)
  • Vertical resolution: 8-bit
  • Advanced trigger modes: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
  • Serial bus decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
  • Supports multiple data formats: settings, waveforms, reference waveforms, CSV, images
  • 3-digit digital voltmeter and 6-digit hardware frequency counter
  • 32 auto measurements with statistics (max, min, standard deviation, etc.)
  • 2 sets of digital voltmeters
  • Threshold testing and free on-screen measurements
  • Supports SCPI remote command control
  • USB Host/Device connectivity
1CH 25MHz waveform generator (DSO2D10, DSO2D15)

1CH 25MHz waveform generator (DSO2D10, DSO2D15)

Supports arbitrary waveform burst output and modulation waveform output.

32 kinds of auto measurements with statistics

Provides real-time measurement and statistical analysis functions.
32 kinds of auto measurements with statistics

Save and export data

Supports saving up to 9 reference waveforms, CSV data, settings, and USB one-click screenshots.
Save and export data
Digital voltmeter functions

Digital voltmeter functions

Includes 2 sets of DVM, a 3-digit voltage meter, and a 6-digit frequency indicator.

Serial bus trigger and decode

Supports protocol monitoring for UART, CAN, LIN, SPI, and I2C.
Serial bus trigger and decode
8M memory depth

8M memory depth

Reduces waveform distortion and restores real waveforms.

PASS/FAIL testing

Provides quick pass/fail analysis for waveform testing.
PASS/FAIL testing
Math operations and FFT

Math operations and FFT

Supports addition, subtraction, multiplication, division, and FFT spectrum analysis.

X-Y mode

Supports dual window display in X-Y format.
X-Y mode

Specifications:

Model DSO2D15 DSO2D10 DSO2C15 DSO2C10
Bandwidth 150MHz 100MHz 150MHz 100MHz
Oscilloscope channels 2CH 2CH 2CH 2CH
Waveform generator 1CH 1CH – –
Oscilloscope
Sample rate 1GSa/s (single channel) 500MSa/s (two channels)
Acquisition
Normal Sample data
Peak-to-peak value Display high frequency and random burr
Average Average waveform, times: 4, 8, 16, 32, 64, 128
High resolution Up to 12bit
Input
Input coupling DC, AC, GND
Input impedance 1MΩ±2% ‖13pF±3pF
Probe attenuation factor 1X, 10X, 100X, 1000X
Voltage rating 300V CAT II
Maximum input voltage 300VRMS (10X)
Horizontal
Waveform interpolation (sin x)/x
Maximum record length Single channel maximum 8M
Two channels maximum 4M
Horizontal scale range 2ns/div~100s/div 1, 2, 5 step by step
Time base mode Y-T, X-Y, Roll
Zero offset ±0.5 div×minimum time base gear
Sample Rate and Delay Time Accuracy ±25ppm
Delta Time Measurement Accuracy (Full Bandwidth)Sample Rate and Delay Time Accuracy single-shot, Normal mode ±（1 sample interval+100ppm×reading+0.6ns）
＞16 times averages ±（1 sample interval+100ppm×reading+0.4ns）
Sample interval=sec/div÷200
Sample Rate and Delay Time Accuracy ±50ppm（at any interval greater than 1ms）
Vertical
Model DSO2D15 DSO2D10 DSO2C15 DSO2C10
Bandwidth 150MHz 100MHz 150MHz 100MHz
Rising time in BNC position (typical) 2.4ns 3.5ns 2.4ns 3.5ns
Vertical resolution 8 bits resolution, each channel samples simultaneously
Vertical sensitivity 2mV/div to 10V/div
Offset range ≥ 200mV/div, ±1V;
＜200mV/div ±50V
Mathematical operation +, -, ×, ÷, FFT
FFT Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
Bandwidth Limit 20MHz
Bass response（-3db） In BNC position ≤ 10Hz
Vertical gain accuracy In ”normal” or ”average” acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
In ”normal” or ”average” acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%
Note: Bandwidth reduced to 6MHz when using a 1X probe
Trigger
Trigger type Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
Trigger level range ±5 divisions from the center of the screen
Trigger mode Auto, Normal, single
Level CH1~CH2 ±4 divisions from the center of the screen
EXT(Only With AWG Model) 0~3.3V
Holdoff range 8ns~10s
Trigger level accuracy CH1~CH2 0.2 div×volts/div within ±4 divisions from the center of the screen
EXT(Only With AWG Model) ±（Set value× 6%+40mV）
Edge trigger Slope Rising edge, falling edge, rising or falling edge
Signal source CH1, CH2, EXT(Only With AWG Model)
Pulse width trigger Polarity Positive polarity, negative polarity
Condition(When) <, >, !=, =
Signal source CH1~CH2,
Pulse width range 8ns ~ 10s
Accuracy 8ns
Video trigger Signal standard NTSC, PAL
Signal source CH1~CH2
Synchronization Scanning line, line number, odd field, even field, all field
Slope trigger Slope rising, falling
Condition(When) <, >, !=, =
Signal source CH1 ~ CH2
Time range 8ns ~ 10s
Accuracy 8ns
Overtime trigger Signal source CH1~CH2，
Polarity Positive polarity, negative polarity
Time range 8ns ~ 10s
Accuracy 8ns
Window trigger Signal source CH1~CH2
Pattern trigger Pattern 0: low level; 1: high level; X: ignore
Level（signal source） CH1~CH2
Interval trigger Slope rising, falling
Condition(When) <, >, !=, =
Signal source CH1~CH2
Time range 8ns ~ 10s
Accuracy 8ns
Under Amp trigger Polarity Positive polarity, negative polarity
Condition(When) <, >, !=, =
Signal source CH1~CH2
Time range 8ns ~ 10s
Accuracy 8ns
UART trigger Condition(When) Start, Stop, data, Parity ERR, COM ERR
Signal source(RX/TX) CH1~CH2
Data format Hex (hexadecimal)
Data length 1 byte
Data bit width 5 bit, 6 bit, 7 bit, 8 bit
Odd-even check none, odd, even
Idle level high, low
Baud rate (optional) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate(user-defined) 300bit/s~334000bit/s
LIN trigger Condition(When) Interval field, synchronization field, ID field, synchronization error, identifier, ID and data
Signal source CH1~CH2
Data format Hex (hexadecimal)
Baud rate (optional) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate(user-defined) 300bit/s~334000bit/s
CAN trigger Condition(When) Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame
Signal source CH1~CH2
Data format Hex (hexadecimal)
Baud rate (optional) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud rate(user-defined) 5kbit/s~1Mbit/s
SPI trigger Signal source CH1~CH2
Data format Hex (hexadecimal)
Data bit width 4, 8, 16, 24, 32
IIC trigger Signal source (SDA/SCL) CH1~CH2
Data format Hex (hexadecimal)
Data index 0~7
When(condition) Start bit, stop bit, No Ack, address, restart, address and data
Measurement
Cursor Voltage difference between cursors △V
Time difference between cursors △T
Reciprocal of △T, in Hertz (1/△T)
Auto measurement frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, – width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, – duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
DVM Data source CH1, CH2
Measurement type DC RMS
AC RMS
DC
Frequency meter hardware 6 bits frequency meter
Arbitrary waveform generator
Channel 1
Sample rate 200MSa/s
Vertical resolution 12 bits
Maximum frequency 25 MHz
Standard waveforms sine, square, ramp,Exp, noise, DC
Arbitrary waveform Arb1, Arb2, Arb3, Arb4
Sin Frequency range 0.1Hz~25MHz
Square/pulse Frequency range 0.1Hz~10MHz
Triangular wave Frequency range 0.1Hz~1MHz
Sampling wave Frequency range 0.1Hz~1MHz
Index Frequency range 0.1Hz~5MHz
Noise
Arb1 Frequency range 0.1 Hz to 10 MHz
Arb2 Frequency range 0.1 Hz to 10 MHz
Arb3 Frequency range 0.1 Hz to 10 MHz
Arb4 Frequency range 0.1 Hz to 10 MHz
Waveform length 4KSa
Frequency Accuracy 100 ppm (<10 kHz) 50 ppm (>10 kHz)
Resolution 0.1 Hz or 4 bits，take the greater one
Amplitude Output range 10mV~7Vp-p (high impedance)
5mV~3.5Vp-p (50Ω)
DC offset Range ±3.5 V, high impedance
±1.75 V, 50 Ω
Resolution 100 μV or 3 bits, take the greater one
Accuracy 2% (1 kHz)
Output impedance 50 Ω
General specifications
Display Display type 7” diagonal TFT liquid crystal
Display resolution 800 (horizontal)*480 (vertical) pixels
Display colour 16 million colours (24 bits true colour)
Persistence time minimum, 1 s, 5 s, 10 s, 30 s, infinite
Display type dot, vector
Display brightness adjustable
Grid type adjustable
Grid brightness adjustable
Interface Standard interface USB Host，USB Device
General specifications Probe compensator output
Output voltage, typical about 2Vpp input ≥1MΩ load
Frequency, typical 1kHz
Power supply 100-120VAC RMS(±10%), 45Hzto 440Hz, CATⅡ
120-240VAC RMS(±10%), 45Hz to 66Hz, CATⅡ
Power consumption <30W
Fuse T, 3.15A, 250V, 5x20mm
Operating temperature 0~50 °C (32~122 °F)
Storage temperature -40~+71 °C (-40~159.8 °F)
Humidity ≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Altitude Operating and nonoperating 3, 000m (10, 000 feet)
Mechanical shock Random vibration 0.31 g RMS from 50Hz to 500Hz,
10 minutes on each axis
Nonoperating 2.46g RMS from 5Hz to 500Hz,
10 minutes on each axis
Operating 50g, 11ms, half-sine wave
Mechanical Size 318 x 110 x 150mm (length x width x height)
Weight 1900g

Additional information

Weight 2.9 kg
Dimensions 39 × 25 × 22 cm
Bandwidth

100MHz, 150MHz
Channels

2
Power Source

Mains

Reviews

There are no reviews yet.

Be the first to review “Hantek DSO2000 Series Dual Channel Digital Oscilloscopes”

Your email address will not be published. Required fields are marked *

Related products